SP60/300 Side Grip Sheet Piling Rig

• Install or extract sheet piles, H-beams, small diameter tubular piles, timber piles, lite piles, trench sheets up to 14m long.*1
• Handle, pitch and drive, with computer- controlled accuracy, any of the above.
• Work from floating pontoons, barges or above water with ease

• No rigging or de-rigging of equipment required
• Work in and access areas conventional piling equipment cannot.
• No expensive piling gates or guide required.
• Install and extract piles in as little as 4m of headroom.*2

• No manual handling, slinging or manual pile pitching required.
• No working at height.
• Rear vision from colour camera.
• No leader mast or crane booms to topple over.
• Install piles up to 8m from base.

Standard Equipment
Bio oil, Rear view camera, Extra work lights, Flashing lights, Spill kit.

Optional Equipment
Height limiter, Auger.

Base Machine Specification

• MACHINE TYPE – DX300 crawler excavator, hybrid modified to operate with side grip piling hammer.
• ENGINE - six cylinder turbocharged, common rail, 7640 cc: diesel engine producing 147kW, meeting European stage III rating.
• HYDRAULIC SYSTEM - twin axial piston pumps, producing 247 ltpm each, operates on synthetic biodegradable BD46 hydraulic oil.
• ELECTRICAL SYSTEM -24 V

Base Machine Dimensions *2

A	Overall width of upper structure	2960 mm
B	Overall width of cab	960 mm
C	Overall height of cab	3065 mm
D	Tail swing radius	3200 mm
E	Overall height of boom	3345 mm
F	Clearance under counterweight	1175 mm
G	Ground clearance	500 mm
H	Tumbler distance	4010 mm
I	Track length	4930 mm
J	Track gauge	2600 mm
K	Track shoe width	800 mm
L	Overall length	10660 mm
M	Overall track width	3400 mm
	Overall weight of machine	30,200 kg
	Ground pressure	0, 41 kgf/cm²

Base Machine Working Ranges *3

	A	Maximum reach	10745 mm
	B	Maximum reach at ground level	10550 mm
	C	Maximum reach depth	7360 mm
	D	Maximum reaching height	7260 mm
	F	Maximum pile reaching height	10330 mm
	H	Maximum downwards reach	6190 mm
	J	Maximum pile reach	7180 mm

Hammer Attachment Specification *4

Ale Piling’s equipment may be interchangeable and accept alternative equipment, if required.
*1 pile length and section suitability is subject to ground conditions and environmental considerations.
*2 minimum working height is subject to certain requirements, please ask for details.
*3 & *4 are excavators manufactures guidance figures, if your requirements are similar to these figures, please ask for confirmation.
Ale Piling accept no liability for the accuracy of these figures. As the company has a policy of continual improvement these figures can be changed without notice.

Download the PDF version of this Ale Piling information.